Wuxi Grace Environmental Technology CO,.LTD
Wuxi Grace Environmental Technology CO,.LTD
Add to Cart
Product Description
Active regeneration refers to providing additional energy from the outside, raising the temperature of the filter element, burning the particles deposited in the filter element, and restoring the clean state of the filter element, including heating regeneration, fuel injection combustion regeneration, electric heating regeneration, microwave regeneration, etc.
(1) heating regeneration Diesel engines can rapidly increase the inlet temperature of DPF by throttling intake and exhaust, in-cylinder post-injection, etc. Wang Dan of Jilin University found that in-cylinder post-injection can increase the outlet temperature of DOC to 650℃, at which temperature most PM will be oxidized and the regeneration effect is good. However, this method will lead to increased fuel consumption and secondary pollution.
(2) Fuel injection combustion-supporting regeneration Fuel injection combustion-supporting regeneration is to add a set of fuel injectors in front of the inlet of the particle trap, inject a small amount of fuel oil, use exhaust oxygen or supply air, ignite with spark plugs or glow plug, and re-ignite the particles with high-temperature gas. Generally, the regeneration process can be completed after 1 ~ 2 min. This method can be regenerated in most cases, and the regeneration effect is good, but an additional fuel supply device is needed, which leads to high cost, and the fuel injection combustion-supporting regeneration can not be accelerated rapidly, otherwise the gas flow will easily blow out the flame.
(3) electric heating regeneration Electric heating regeneration is to heat the particle trap by electrifying heating method, so as to promote the ignition of particles. There are many types of electrically heated regenerated particulate traps. One is the filter element of the catcher, which is wound with continuous ceramic fibers on a metal resistance heating pipe. One end of the heating pipe is an exhaust inlet, while the other end is closed, forcing the exhaust gas to flow out after passing through the ceramic fiber, and supplying power to the heating pipe by a DC power supply with a voltage of 12 V.. Another technique is to use crystalline SiC with high conductivity as filter material. When regeneration is needed, the electric current is directly passed through the conductive trap material, so that the heating temperature of the trap material is increased, and thus the particles deposited on the trap material are heated and burned. The flexible management of electric heating regeneration temperature can improve cold start and low temperature performance, but the electric heating control system has higher requirements, higher cost and higher power consumption. In addition, uneven heating may cause uneven regeneration of filter elements, resulting in local overheating of fruit green body and damage.
(4) Microwave regeneration Microwave heating regeneration is to use the unique selective heating and volume heating characteristics of microwave energy to form a spatially distributed heat source inside the filter body, heat PM deposited on the filter body, and make the particles ignite and burn. The effect of microwave regeneration treatment is determined by the different dielectric properties between the filter material of particle trap and the particles deposited on its surface. If the selected matrix material is transparent to microwave, the effect of heating particles will be very successful; On the contrary, if microwave absorbing materials are used, the trap and particles
2. GRACE DPF general specifications
| Specification size | Volume( L) | CPSI | Remarks | |
| Diameter (mm) | Height (mm) | |||
| 118.4 | 152.4 | 1.68 | 100,200,300 | |
| 118.4 | 203.2 | 2.24 | 100,200,300 | |
| 118.4 | 254 | 2.80 | 100,200,300 | |
| 127 | 203.2 | 2.57 | 100,200,300 | |
| 143.8 | 101.6 | 1.65 | 100,200,300 | |
| 143.8 | 152.4 | 2.47 | 100,200,300 | |
| 143.8 | 177.8 | 2.89 | 100,200,300 | |
| 143.8 | 203.2 | 3.30 | 100,200,300 | |
| 143.8 | 228.6 | 3.71 | 100,200,300 | |
| 143.8 | 254 | 4.12 | 100,200,300 | |
| 143.8 | 304.8 | 4.95 | 100,200,300 | |
| 190.5 | 203.2 | 5.79 | 100,200,300 | |
| 190.5 | 254 | 7.24 | 100,200,300 | |
| 190.5 | 304.8 | 8.68 | 100,200,300 | |
| 228.6 | 203.2 | 8.34 | 100,200,300 | |
| 228.6 | 254 | 10.42 | 100,200,300 | |
| 228.6 | 280 | 11.49 | 100,200,300 | |
| 228.6 | 304.8 | 12.50 | 100,200,300 | |
| 241.3 | 254 | 11.61 | 100,200 | |
| 241.3 | 304.8 | 13.93 | 100,200 | |
| 266.7 | 203.2 | 11.35 | 100,200 | |
| 266.7 | 254 | 14.18 | 100,200 | |
| 266.7 | 280 | 15.63 | 100,200 | |
| 266.7 | 304.8 | 17.02 | 100,200 | |
| 285.75 | 254 | 16.28 | 100,200 | |
| 285.75 | 304.8 | 19.54 | 100,200 | |
| 285.75 | 355.6 | 22.79 | 100,200 | |
| 304.8 | 254 | 18.52 | 100,200 | |
| 304.8 | 280 | 20.42 | 100,200 | |
| 304.8 | 304.8 | 22.23 | 100,200 | |
| 304.8 | 330.2 | 24.08 | 100,200 | |
| 304.8 | 381 | 27.79 | 100,200 | |
| 330.2 | 304.8 | 26.09 | 100,200 | |
| 330.2 | 381 | 32.61 | 100,200 | |
| 330.2 | 432 | 36.97 | 100,200 | |
| Specification size | Volume ( L) | CPSI | Remaiks | |
| Length * width | Height(ium) | |||
| 150x150 | 150 | 3.38 | 26, 50,70,100,150,200 | Square |
| 150x150 | 200 | 4.50 | 26,50,70,100,150,200 | Square |
| The above is the general specification of DPF. We can also customize the sizes and specifications required by customers. | ||||
Company Information
Grace Environmental Protection Technology Co., Ltd. is a technical enterprise specialized in various types of exhaust gas treatment. The team has rich internal combustion engine exhaust gas and VOC treatment experience and more than ten years of working experience, and is a very few suppliers with the ability to design the whole process from catalyst to overall solution. At present, the products cover all kinds of exhaust catalysts, DOC,CDPF,SCR,ASC, etc. At the same time, they cover waste liquid treatment and indoor air purification, providing customers with the most competitive products and services. At present, the company has passed the certification of ISO14001 environmental management system, ISO9001 international quality certification, AAA enterprise credit rating and other certifications, and has an annual output of 500,000 litres of catalyst production coating line, complete quality management system and process control. Various performance testing capabilities, including SRD,SRF,ICP,BET, etc.!
Packaging & Shipping
Certifications
FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons Or wooden cases and foam. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CRF, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A: 1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.